2019 Kubota SSG2524

Call for Price




Kubota by Land Pride: A great choice for contractors, landscapers, and forestry departments, this Stump Grinder turns large stumps into small chips. It features durable carbide teeth mounted to a 1/2" cutting wheel that spins up to 1,100 rpm. Fully controllable from inside the cab, this unit has a maximum cutting arc of 55 degrees and depth of 8" below ground. Only available through Kubota Dealers.

  • Universal quick attach mounting system: For quick and easy attachment.
  • 8" Digging depth: A good depth below the ground. Removes base of most trees.
  • Adjustable skid shoes: Adjustable to fit all sizes of skid steers.
  • Pivoting discharge deflector: Discharge deflector pivots up while cutting wheel is digging into the ground.
  • Welded on serrated step: Good safe step for accessing skid steer operator’s seat.
  • High speed cutting wheel: Cuts faster with less vibration.
  • Permanent hose holders: Hoses aren’t zip-tied to the frame. Zip ties can break over time.
  • Replaceable carbide cutting teeth: Cutting teeth are easy to replace. Carbide tips for extra long life.
  • Hydraulic hose lines: Hydraulic hoses absorb shock. Steel hydraulic lines crack from vibration.
  • Case drain hydraulic line: Protects against component damage.
  • Keyed, tapered spindle on end of hydraulic motor: Able to draw cutting wheel tight against the tapered shaft providing an excellent fit-up and less likely to shear the key off.
  • Cutting wheel designed with wheel puller access holes: Makes it easier to pull the cutting wheel off of the motor spindle.
  • Attached rain tight manual holding tube: Keeps manual with stump grinder for quick easy access. Manual won’t get wet.
  • Offset articulating arm: Allow for optimum line-of-site from operator’s seat.
  • Mounting Plate: Quick Attach
  • Main Frame: 6 in. x 6 in. x 1/4 in. Tube
  • Overall Mounting Width: 48 in.
  • Overall Length: 60 in.
  • Overall Weight: 540 lb.
  • Drive And Control System: Hydraulic motor with electric over hydraulic
  • Hydraulic Requirements: 17 to 32 GPM
  • Articulate Cylinder: 3 in. x 6 in. stroke with 1 1/4 in. rod dia.
  • Tilt Cylinder: 3 in. x 6 in. stroke with 1 1/4 in. rod dia.
  • Hydraulic Lines & Hoses: 3/4 in. I.D. Hydraulic hoses with crimp on cordura sleeve; 1/4 in. I.D. Case drain hydraulic hose
  • Number of Cutting Teeth: Straight: 8 - Replaceable carbide teeth
  • Number of Cutting Teeth: Left-Hand: 12 - Replaceable carbide teeth
  • Number of Cutting Teeth: Right-Hand: 12 - Replaceable carbide teeth
  • Cutting Wheel Speed: 590 to 1100 rpm
  • Cutting Arc: 55 deg.
  • Maximum Cutting Depth Below Ground: 8 in.
  • Greasable Hinge Points: Yes
  • Color: Black
  • Outside Cutting Wheel Diameter: 23 3/4 in.
  • Cutting Wheel Thickness: 1/2 in.
  • Maximum Pressure Rating: 3500 psi



Cutting Diameter
23 3/4 in.
Working Depth
8 in.
540 lb.
60 in.
48 in.